Bodnárová, L., Zelený, M., Sedlák, P., Straka, L., Heczko, O., Sozinov, A. and H. Seiner. H Switching the soft shearing mode orientation in Ni–Mn–Ga non-modulated martensite by Co and Cu doping. Smart Materials and Structures 29, no. 4 (2020) 045022.

Chulist, R., Nalepka, K. and Sozinov, A. Hierarchical twin microstructure in modulated 10M Ni–Mn-Ga single crystals. An analysis including shuffling of atomic layers. International Journal of Plasticity 126 (2020) 102628.

Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK

Collan, M. and Michelsen, K-E, 2020, Closing words – Quo Vadis Manufacturing 4.0, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK

Collan, M. and Savolainen, J., 2020, To Phase or Not to Phase: Quantifying the Effect of Phasing Construction Projects, Nordic Journal of Business, 69, 1, 66-86

Hiilamo, H.(2020)”How to reform the Nordic welfarestate model to endure equality in wake of  automatization” in Janne Holmen (eds). Nordic Welfarestate Anthology, Routledge  

Hiilamo, H.(2020)”Ilmastonmuutos, kestävyysvaje ja sotu-uudistus.” Juhlaluento, 27.1. 2020, Yhtesikuntapolitiikka, 85(2), 197-203            

Hiilamo, H. and Aaltonen, H., 2020, Modelling the Societal Division of Added Value Created Through Manufacturing 4.0 Expert Interviews in South Korea, Germany and the Netherlands, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK

Hiilamo, H. & Lehmus-Sun, A.(2020) ” Tuleeko ongella kaloja?” Kansantaloustieteellinen aikausikirja, 106(1), 30-45      

Jyrkiäinen, J. & Hiilamo,H.(2020) “Automaatio tulee onko virkamies valmis? Valtion henkilöstön kokemat valmiudet kohdata työelämän murros.” Yhteiskuntapolitiikka, 85(3),233-246

Kaivo-oja, J., Mikkel Stein Knudsen M.S., and Lauraeus, T., 2020 Coping with Technological Changes: Regional and National Preparedness in Face of Technical Change, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK     

Kaivo-oja, J., Knudsen, M.S., Lauraeus, T. & Kuusi, O. (2020). Future Knowledge Management Challenges: Digital Twins Approach and Synergy Measurements. Management Studies, 8 (2).                          

Kaivo-oja, J., Knudsen, M.S. & Lauraeus, T. Digital Twin:  Current Shifts and their future implications. International Journal of Web Engineering and Technology. Accepted for publication.     

Kaivo-oja, J., Lauraeus, T. & Knudsen, M.S. Global Export Strategy of the “Born Global” Companies, Business Modelling, and Dynamic Capabilities: Eight Knowledge Management Cases of Country and City Data Analytics. (Accepted for KMO2020)            

Kesse M. A, Buah, E., Handroos, H. and Godwin K Ayetor, G. K. (2020) Development of an Artificial Intelligence Powered TIG Welding Algorithm for the Prediction of Bead Geometry for TIG Welding Processes using Hybrid Deep Learning, Metals 2020, 10(4), 451

Kinnunen J., Georgescu, I., and Collan, M., 2020, Center of gravity real options method based on interval-valued fuzzy numbers, in Kahraman, C., Onar, S., Oztaysi, B., Sari, I., Cebi, S., Tolga, A. (Eds.), Intelligent and Fuzzy Techniques: Smart and Innovative Solutions – Proceedings of the International Conference on Intelligent and Fuzzy Systems (INFUS2020), Istanbul, Turkey, 21-23. July, 2020., 1292-1300, Advances in Intelligent Systems and Computing, 1197, Springer

Knudsen, M.S. & Kaivo-oja, J. (Accepted for publication). Collaborative Robots: Frontiers of Current Literature. Journal of Intelligent Systems: Theory and Applicants.                          

Korpela, M., Riikonen, N., Piili, H., Salminen, A. and Nyrhilä, O., 2020, Additive Manufacturing—Past, Present, and the Future, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK    

Kustov, S., Saren, A., Sozinov, A., Kaminskii, V. and Ullakko. K. Ultrahigh damping and Young’s modulus softening due to a/b twins in 10M Ni-Mn-Ga martensite. Scripta Materialia 178 (2020) 483-488.                        

Kyläheiko, K., and Maijanen, P., 2020 Industry 4.0. Transformation Challenge in Light of Dynamic Capabilities, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK

Laitinen, V., Merabtene,M., Stevens, E., Chmielus, M., Van Humbeeck,J. and Ullakko, K., 2020, Additive Manufacturing from the Point of View of Materials Research, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK     

Laitinen, V., Sozinov, A., Saren, A., Chmielus, M. and Ullakko, K Characterization of as-deposited and heat-treated Ni-Mn-Ga magnetic shape memory alloy manufactured via laser powder bed fusion. Manuscript in preparation.                        

Laitinen, V., Sozinov, A., Saren, A., Salminen, A. and K. Ullakko. Effect of post-process heat treatment on microstructure and properties of a Ni-Mn-Ga alloy deposited using laser powder bed fusion. TMS2020: 149th Annual Meeting & Exhibition, San Diego (USA), 23-27 February 2020.

Lauraeus, T., Kaivo-oja, J. & Tinnilä, M. (2020). Innovation Business Models and Strategies for the Growing Business of Future Innovative Technologies. The 4th TECHNIUM International Conference, e-conference, Romania 30.5.2020.                    

Lauraeus, T., Tinnilä, M. & Kaivo-oja, J. (2020). Future Consumer Value Creation, Intelligent Products, Services and Practices Developed of Technology Innovations for Different Environments and Society: The Health Care, Consumption, the Elderly, Home, Traffic, Industry. The 4th TECHNIUM International Conference, e-conference, Romania, 30.5.2020.                          

Lauraeus, T., Tinnilä, M. & Kaivo-oja, J. (2020). A Foresight of Innovations in Mobility and Logistics for Future Business Potential: Future Economic Growth and Potential Innovative Business Opportunities. The 4th TECHNIUM International Conference, e-conference, Romania, 30.5.2020.               

Lauraeus, T., Tinnilä, M. & Kaivo-oja, J. (2020). Finland’s Future Business Potential and the Most Important Future Technological Innovations and Strategic Growth Areas for Finland’s Competitiveness: New business models, new smart products and services. The 4th TECHNIUM International Conference, e-conference, Romania, 30.5.2020.

Li, M., Milojevic. A., and Handroos.H., 2020, Robotics in Manufacturing—The Past and the Present, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK
          

Morreale, A., Vu, T., Mittone, L., and Collan, M., 2020, To wait or not to wait? Use of the flexibility to postpone investment decisions in theory and in practice, Sustainability, 12, 8, 3451

Njock Bayock, F., Kah, P., Salminen, A., Belinga, M., Yang, X., Feasibility study of welding dissimilar Advanced and Ultra High Strength Steels. Reviews On Advanced Materials Science. Vol. 59: Issue 1, 54-66.

Nyamekye, P., Unt, A. Salminen, A & Piili, H. “Integration of Simulation Driven DfAM and LCC Analysis for Decision Making in L-PBF,” Metals, vol. 10, no. 9, p. 1179, Sep. 2020.

Nygren, H., Virolainen, M., Hämäläinen, R., and Rautopuro, J., 2020, The Fourth Industrial Revolution and Changes to Working Life: What Supports Adult Employees in Adapting to New Technology at Work?, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK

Ogbeibu, S., Emelifeonwu, J., Senadjki, A., Gaskin, J. & Kaivo-oja, J. (2020). Technological Turbulence and Greening of Team Creativity, Product Innovation, and Human Resource Management: Implications for Sustainability. Journal of Cleaner Production, 244. DOI:

Peltoniemi, J. (2020) “Valtion kassasasta omaan tiliin, sosiaalitilit sosiaaliturvauudistuksessa.”Yhteiskuntapolitiikka, 85(1), 90-97                                              

Puhakka A. & Rautopuro J. 2020. Kansainvälistyvä tieteentekijä kansallisen tiedemaailman laadun parantaja? – haavekuvat ja todellisuus. Teoksessa: Jani Ursin & Reetta Muhonen (toim.). Tuntematon korkeakoulutus. Research in Educational Sciences: 80, 19-37. 71 – 114.

Pulkka, V-V.(2020) “Perustulon kannatus Suomessa.” , Yhteiskuntapolitiikka 85(3),e-julkaisu 6.5.      
      
Ouakrim-Soivio, N., Niilo-Rämä, M., Rautopuro, J. and Rantala. 2020. Does immigrant background count? Experiences of bullying and discrimination among Finnish secondary school students. (submitted) 

Roth, S., Schwede, P., Valentinov, V., Pérez-Valls M., & Kaivo-oja, J. 2020. Harnessing big data for a multifunctional theory of firm, European Management Journal, 38(1), 54-61.

Saren, A., Sozinov, A., Kustov, S. and Ullakko. K Stress-induced a/b compound twins redistribution in 10M Ni-Mn-Ga martensite. Scripta Materialia 175 (2020) 11-15.

Savolainen, J. and Collan, M., 2020 (in press), Additive manufacturing technology and business model change – a review of literature, Additive Manufacturing, Elsevier

Savolainen, J. and Collan, M., 2020, Industrial additive manufacturing business models – what we know from the literature?, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK

Savolainen, J. and Collan, M., 2020, Quantifying the Economic Feasibility of Additive Manufacturing – Simulating Production Lifetime in the Context of Spare Parts Production, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK

Sozinov, A, Musiienko, D., Saren, A., Veřtát ,P., Straka, L., Heczko, O., Zelený, M., Chulist, R. and Ullakko. K. Highly mobile twin boundaries in seven-layer modulated Ni–Mn–Ga–Fe martensite. Scripta Materialia 178 (2020) 62-66.

Stoklasa, J., Luukka, P., and Collan, M., 2020, Possibilistic Fuzzy Pay-off Method for Real Option Valuation with Application to Research and Development Investment Analysis, Fuzzy Sets and Systems

Stoklasa, J., Morreale, A., Talasek, T., and Collan, M., 2020, The mean & range effect – a sweet spot stimulating risk-seeking in managerial decision support, Nordic Journal of Business, 69,1, 21-43

Summanen, A.-M., Rautopuro, J., Kannas, L. and Paakkari, L. 2020. 2020. Objective health literacy among 9th graders in Finland. (submitted).

Summanen, A.-M., Rautopuro, J., Kannas, L. and Paakkari, L. 2020. Measuring health literacy in basic education in Finland: the development of a competence-based measurement instrument (submitted)           

Tynjälä, P., Virolainen, M., Heikkinen, H.L.T., & Virtanen, A. (2020). Promoting cooperation between educational institutions and workplaces. In C. Aprea, V. Sappa & R. Tenberg (Eds.) Connectivity and integrative competence development in vocational and professional education and training (pp. 19-39). ZBF-Beiheft, 29. Franz Steiner Verlag.

Urbani, M., Brunelli, M., and Collan, M., 2020, A comparison of maintenance policies for multi-component systems through discrete event simulation of faults, IEEE Access, 8, 1, 2169-3536

Urbani, M. and Collan, M., 2020, Additive manufacturing cases and a vision for a predictive analytics and additive manufacturing based maintenance business model, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK

Urbani, M., Petri, D., Brunelli, M., and Collan, M., 2020, Maintenance management in light of Manufacturing 4.0, in Collan, M. and Michelsen, K-E. (Eds.), Technical, Economic, and Societal Effects of Manufacturing 4.0 – Automation, Adaption, and Manufacturing in Finland and Beyond, Palgrave McMillan, London, UK

Zelený, M., Straka, L., Rameš, M., Sozinov, A. and Heczko.O. Origin of magnetocrystalline anisotropy in Ni-Mn-Ga-Co-Cu tetragonal martensite. Journal of Magnetism and Magnetic Materials 503 (2020) 166522.                          

Tweet